econtrols_02-16-17031004.jpg
Replacement Market Applications
In two story homes or condos, the downstairs is overcooled during the cooling season to make the upstairs more comfortable and the upstairs is overheated during the heating season to make the downstairs more comfortable.
Problem
The wireless Comfort365 Touch Programmable Thermostat with Airflow Control works the same as any programmable thermostat by controlling heating and cooling calls but also automatically or manually directs more airflow to the upstairs during the cooling season and more airflow to the downstairs during the heating season so that the upstairs and downstairs are cooled or heated at the same rate.
Solution
Wireless Touch Programmable Thermostat with Airflow Control
The thermostat is installed downstairs using the existing wiring to the system. A wireless temperature sensor is installed upstairs and wireless dampers are installed to control the airflow to the upstairs and downstairs. The thermostat monitors the upstairs and downstairs temperatures during calls and adjusts the damper positions and airflow as required to provide uniform heating and cooling. NO WIRING TO DAMPERS OR SENSORS. NO ZONING SYSTEM REQUIRED.
Finding a powerful zoning panel that includes more features, wireless, easier to install, and at a low competitive cost.
Problem
Solution
ProC Series, 2-6 Zones, Wired and Wireless, for
Replacement Market
The ProC series features 2 to 6 zones in the same case, for gas/electric, conventional heat pumps and dual fuel heat pumps with 2 stages of heating and 1 stage cooling or 1 stage heating and 2 stages of cooling. Compatible with any 24VAC, battery powered or power sharing thermostat. Or, communicates wirelessly to the T200WZ or T500WZ thermostat.

Panels use plug and play dampers for easy installation. The panels include fresh air control in compliance with Title24 and
ASHRAE 62-2. The panels are programmed using the handheld programming display, PDMi3, free to qualified contractors or programmed using the PDM on the panel. The programming display can be used to guide the installer through set up, test the installation, set bypass options, clone multiple panels and set advanced options.
econtrols_02-16-17029002.jpg econtrols_02-16-17031003.jpg
Finding a zoning panel that includes more features, easier to install and at a low competitive cost.
Problem
Solution
ProR Series, 2-3 Zones, for RNC
The ProR series for retrofit is an economical and powerful 2 or 3 zone panel for gas/electric, conventional heat pumps and dual fuel heat pumps with 2 stages of heating and 1 stage cooling or 1 stage heating and 2 stages of cooling. Compatible with any heat 24VAC, battery powered or power sharing thermostat.

Panels use plug and play dampers for easy installation. Panels are Out of the Box - Ready for Installation. The panel

includes fresh air control in compliance with Title24 and ASHRAE 62-2. The handheld programming display, PDMi3, is free to qualified contractors and can be used to guide the installer through set up, test the installation, set bypass options, clone multiple panels and set advanced options.
26072 Merit Circle #110 / Laguna Hills, CA 92653 949-916-0945 / Fax 949-458-8502
eControls
Make sure you're viewing the latest version of our website by clicking the refresh button on your navigation bar.